| Customization: | Available |
|---|---|
| Type: | Horizontal Metal Drawing Machine |
| Usage: | Wire, Rope Wire |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Name | Specification |
| Suitable material | Copper wire |
| Inlet diameter() | Max 2.05 |
| Outlet diameter() | 8*Φ0.20~0.68,Φ0.20,match 1.8mm inlet size) 8*Φ0.205~0.68(outlet Φ0.20is with inlet ofΦ1.8mm) |
| Mechanical speed(m/min) | Max 1800 |
| Drawing wheel diameter() | 100 |
| Capstan diameter() | 100 |
| No of dies | Max 22 |
| Elongation | Front 11 Dies 26%/ Back 11 Dies 21% 26%for the first one to the 10th one,21% for the rest dies. |
| Mechanical transmission ratio | Front 11 Axial 1.25,11~14Axial 1.1944,15~18Axial 1.1904,19~22 Axial drive by fix speed wheel 1.25for the first 10 spindles,1.1944 for the 11th to the 14th,1.1904 for the 15th to the 18th,the spindles from 19th to 22st are driven by capstan motor |
| Drawing motor power(kw) | 110 |
| Capstan motor power(kw) | 37 |
| Transmission method | gear transmission |
| Drawing wheel arrangement method | horizontal arrangement |
| Drawing lubricant cooling method | High pressure spray (high pressure hole for both dies and drawing wheels) |
| Flow rate of cooling water for drawing lubricant | 180 L/Min |
| Gear lubricating method | High pressure oil spraying (driven by gear pump with oil cooling device) |
| Flow rate of water for lubricant oil | 22 L/Min |
| Overall size(L x W x H) | 4790*980*1150 (excluding motor) |
| Weight | About 3500KG ( Motor and Motor base included) |
| Working pressure | 0.2~0.4 Mpa |
| Temperature | ≤25ºC |
| PH Value | 7~8 |
| Rate of flow | 210L/min |
| Note: cooling water shall not include suspended substance, mineral matters, metal impurity, non-soluble matters and corrosive matters. | |
| Power supply (3 phases) | ~3×380V(±5%) |
| Power supply single phase | ~220V(±5%) |
| Frequency | 60 Hz (+/-2%) |
| Model | WS630 |
| working range() | 8*Φ0.20~0.68mm |
| Mechanical Speed (m/min) | Max1800 |
| Winding motor power(kw) | 15 |
| Traverse motor power(w) | 550 |
| positioning motor power(w) | 15 |
| Out Diameter of bobbin() | 630 |
| Barrel diameter() | 280 |
| shaft hole diameter() | 125 |
| Width of the bobbin(mm)(Max.)() | MAX 475 |
| Capacity(Max.)(kg) | MAX 500 |
| Break method | pneumatic to hydraulic |
| Overall size L×W×H() | 1720×820×2030 |
| Net weight(kg) | 1900 |
| Power supply 3 phases (V) | 3 X 380 (-5%~ +10%) |
| Power supply single phase (V) | 220 (-5~+10%) |
| Frequency (Hz) | 60 Hz (+/-2%) |
| Working pressure | 0.6~0.7 Mpa |
| Undulation Value | ±0.02 |
| Due point | -25ºC |
| Air flow | 50L/min |
| Note: The compressed air should be clear and not polluted. | |
| TR Soft Wire | |||
| Dia.(mm) | Line Speed (m/min) | Elongation% | Capacity/Hour(KG/H) |
| 0.20 | 1300 | 15-20 | 174.48 |
| 0.4 | 700 | 20-25 | 375 |
| 0.5 | 600 | 20-25 | 492 |
| 0.68 | 480 | 20-25 | 732 |
){kind=link}